Fleck 7000 sxt service manual

Dealkalizers Fleck Model SXT Series Operation and Service Manual www.doorway.ru • AmeriWater • Stop 8 Rd. • Dayton, OH FLECK SXT Timer Service Manual • 3. TIMER OPERATION Meter Immediate Control A meter immediate control measures water usage and regenerates the system as soon as the calculated system capacity is depleted. The control calculates the system capacity by dividing the unit capacity (typically expressed. 4. Make plumbing connections to the Fleck SXT valve. 5. Plug the Fleck SXT control valve into a volt GFI receptacle. 6. Place the header in the SERVICE position and cycle the valve to the BACKWASH position. Let the water flow slowly into the mineral tank until the air is purged from the system. 7.

1. Press the Extra Cycle button. The service icon will flash to indicate that a regeneration is queued. 2. To cancel a queued regeneration, press the Extra Cycle button. Regenerating Immediately Press and hold the Extra Cycle button for five seconds. Rev D 2 • JE11 Fleck SXT Timer. FLECK® // Service Manual • 3 INSTALLATION START-UP Water Pressure A minimum of 25 pounds ( bar) of water pressure is required for regeneration valve to operate effectively. Electrical Facilities A continuous volt, 60 Hertz current supply is required. Make certain the current supply is always hot and cannot be. 4. Make plumbing connections to the Fleck SXT valve. 5. Plug the Fleck SXT control valve into a volt GFI receptacle. 6. Place the header in the SERVICE position and cycle the valve to the BACKWASH position. Let the water flow slowly into the mineral tank until the air is purged from the system. 7.

1. Press the Extra Cycle button. The service icon will flash to indicate that a regeneration is queued. 2. To cancel a queued regeneration, press the Extra Cycle button. Regenerating Immediately Press and hold the Extra Cycle button for five seconds. Rev D 2 • JE11 Fleck SXT Timer. 1. Press the Extra Cycle button. The service icon will flash to indicate that a regeneration is queued. 2. To cancel a queued regeneration, press the Extra Cycle button. Regenerating Immediately Press and hold the Extra Cycle button for five seconds. Rev D FLECK SXT Timer Service Manual • 3. • The information, specifications and illustrations in this manual are based on the latest information available at the time of printing. The manufacturer reserves the right to make changes at any time without notice. • This manual is intended as a guide for service of the valve only. System installation requires information from a number of.